Beach Warning Flag Specifications
[Enlarge] |
Specifications for Beach Warning Flag Signs
- Sign Size: 30” wide X 36” high
- Sign Materials: .080 Engineer Grade, Anodized,
Reflective Aluminum Sheeting; .080 Aluminum with
Chemical Conversion Coating Covered with White Engineer
Reflective Sheeting; or Approved Equivalent. Two
Standard Radius Holes for Mounting; Standard Rounded
Corners.
- Sign Color: Signs shall have black border and
letters and use 3 M 700 series reflective ink colors.
The pantone colors for the flag graphic shall be: Green
(PMS 348); Yellow (PMS 123); Red (PMS 186); and Purple
(PMS 266).
|
|
|
 |
Specifications for Beach Warning Flags
- Flag Size: Flags shall be 750 mm x 1000 mm or
English equivalent with rust-proof grommets.
- Flag Sets: Five (5) rectangle beach warning flags in
four (4) colors, one of which will have a 26 inch
diameter white “no swim” graphic
[PDF - 12 KB] printed on both sides.
- Flag Colors: b Green Flag. PMS 348 Pantone Color
Acid Dye. b Yellow Flag. PMS 123 Pantone Color Acid Dye.
b Red Flag. PMS 186 Pantone Color Acid Dye. b Red Flag
with Graphic. PMS 186 Pantone Color Acid Dye. The
graphic must be white and positioned in the middle of
the flag. No screen-printing, sprayed on, painted on, or
sewed on graphics are allowed. The “No Swim” graphic is
attached as Attachment B. b Purple Flag. PMS 266 Pantone
Color Acid Dye.
- Fabric: Flags shall be of 200 denier DuPont SolarMax
UV resistant nylon or approved equivalent. Fabric must
be double-sided (2) pieces of fabric sewn together and
treated for water repellency.
- Finishing: Flags shall include a white tape header
made with 2 rust-proof grommets. Two (2) rows of “X”
stitching through the center of the flag are required to
prevent ballooning. Four (4) rows of stitching top,
bottom, and fly end are required.
|
